Welcome to the official website of Beijing MCC Haitao Machinery Equipment Co., Ltd!

Language

Multi-ply Fabric Conveyor Belt（EP/NN/CC）

The design of mult-ply fabric conveyor belt enables application in all areas of material handling. lt consists of rubber cover, carcassand core rubber

key word:

Category:

Conveyor Belt Series

Message

Product details

Construction

The design of mult-ply fabric conveyor belt enables application in all areas of material handling. lt consists of rubber cover, carcassand core rubber

Rubber cover is developed from blends of natural and synthetic rubber, which is designed to protect the carcass from abrasionimpact, deterioration, water and other injurous influences. t can be compounded to meet particular service conditons such asabrasion resistant, oil resistant, heat resistant, fire resistant, acid 8 alkali resistant and anti-static, etc.

Carcass consists of one or multiple plies of dipped synthetic reinforced fabric based on EP (warp-Polyester + weft-Polyamide). NNNylon/Nvlon) or CC (Coon/Coton, t maintaine bet tension and suppies structural etrength, which undertakee almost al the oadduring in work.

Core rubber has good fabric adhesion properties, which makes the fabrics bond tight. That can increase flex life and create a more elastic link, so that fabrics flex without separation when belt under working.

Ripstop Belts With steel layer embedded between the cover and the carcass is designed to withstand the impact with sharp and extreme load materials. The special characteristic ensures the belt' s resistance to tearing.

Application

Cement,concrete plants

Sand,gravel, stone industry

Heating and power stations

Garbage incineration plants

Road construction machinery

Recycing.oompostindustry

Mineral processing plants

Timber industry and sawmills

Port

Grains

Specification:

Fabric Type	Ply Strength（N/mm)	Ply Thickness（mm）	（mm）Cover thickness		Ply	（mm）Range
			Thickness	Thickness
EP/NN100	100	1.00	3.0	1.5	1~12	400-2200
EP/NN125	125	1.10
EP/NN150	150	1.15
EP/NN200	200	1.25	4.5	3.0
EP/NN250	250	1.50
EP/NN300	300	1.75	6.0	6.0
EP/NN350	350	2.20
EP/NN400	400	2.40
Ply Thickness=A	No.s of Ply=B Carcass thickness=A*B-0.4

Recommended Min.Pulley Diameters(mm）.:

CARCASS THICKNESS											荐用最小直径RECOMMENDED MIN. PULLEY DIAMETERS
Warp material											RMBT利用率RMBT use ratio
Cotton	Polyamide/ Cotton			Cotton/Ployester			Ployester		Artificial silk		Pulley Category			Pulley Category			Pulley Category
C=80	C=90			C=98			C=108		C=118		60~100%			30-60%			30%

A- driving pulley
B- tail pulley
C- Snub pulley

From	to	From	to	From	to	From		to	From	to	A	B	C	A	B	C	A	B	C
	1.2		1 .1		1			0.9		0.8	100
1.3	1.5	1.2	1.3	1 .1	1.2	1		1.1	0.9	1	125	100		100
1.6	2	1.4	1.7	1.3	1.6	1.2		1.4	1.1	1.3	160	125	100	125	100		100	100
2.1	2.5	1.8	2.2	1.7	2	1.5		1.8	1.4	1.6	200	160	125	160	125	100	125	125	100
2.6	3.1	2.3	2.7	2.1	2.5	1.9		2.3	1.7	2.1	250	200	160	200	160	125	160	160	125
3.2	3.9	2.8	3.5	2.6	3.2	2.4		2.9	2.2	2.6	315	250	200	250	200	160	200	200	160
4	5	3.6	4.4	3.3	4	3		3.7	2.7	3.3	400	315	250	315	250	200	250	250	200
5.1	6.2	4.5	5.5	4.1	5.1	3.8		4.6	3.4	4.2	500	400	315	400	315	250	315	315	250
6.3	7.8	5.6	7	5.2	6.4	4.7		5.8	4.3	5.3	630	500	400	500	400	315	400	400	315
7.9	10	7.1	8.8	6.5	8.1	5.9		7.4	5.4	6.7	800	630	500	630	500	400	500	500	400
10.1	12.5	8.9	11.1	8.2	10.2	7.5		9.2	6.8	8.4	1000	800	630	800	630	500	630	630	500
12.6	15.6	11.2	13.8	10.3	12.7	9.3		11.5	8.5	10.5	1250	1000	800	1000	800	630	800	800	630
15.7	17.5	13.9	15.5	12.8	14.2	11.6		12.9	10.6	11.8	1400	1250	1000	1250	1000	800	1000	1000	800
17.6	20	15.6	17.7	14.3	16.3	13		14.8	11.9	13.5	1600	1250	1000	1250	1000	800	1000	1000	800
		17.8	20	16.4	18.3	14.9		16.6	13.6	15.2	1800	1400	1250	1400	1250	1000	1250	1250	1000
				18.4	20	16.7		18.5	15.3	16.9	2000	1600	1250	1600	1250	1000	1250	1250	1000